PMFR Online
Three-Spoke Super Lite Modular Wheels


Teardrop Style Wheels


Holes Style Wheels


Holes Style Wheels

Billet spokes are made of 6061-T651 aluminum.  Front wheels come assembled complete with a flanged front hub, axle spacer, and bearings. We now sell a split flanged front hub for dual rotor applications. Rear wheels come assembled complete with a rear hub of 7075 aluminum, bearings, bolts for both the brake and sprocket, and axle spacers (please specify axle diameter). You will have to trim the axle spacers on the rear to fit your application. The rear hub is available in 3" or 3 1/2" offsets with the exception of W120 which has a 4 1/4" offset. The brake side uses four 5/16" bolts on a 3" bolt circle. On the sprocket side you now have a choice of the standard bearing with eight 5/16" bolts on a 3" bolt circle or for the 15" wheel a larger bearing and six 3/8" bolts on a 4 1/4" bolt circle.
 

Front Wheels

W188T 1.85 x 18 teardrop $570.00
W188H 1.85 x 18 holes $570.00 W123T 3 x 17 teardrop $680.00
W189T 2.15 x 18 teardrop $570.00 W123H 3 x 17 holes $680.00
W189H 2.15 x 18 holes $570.00

All part numbers are for a single disk setup, if you require dual disks add a D after the part number and $40.00 to the cost.
 

Rear Wheels

W196 6 x 17 base $715.00 W193 base 9 x 15 $955.00
W198 6 x 17 light weight base $715.00 W194 base 10 x 15 $975.00
W190 6 x 18 base $715.00 W119 base 11 x 15 $995.00
W222 6 x 15 base $930.00 W120 base 12 x 15 $1020.00
W223 7 x 15 base $940.00

Above part numbers are base numbers.
  For a teardrop style, add T to the end of the part number.  For a holes style, add an H to the end of the part number.

All wheels will be left drive unless right is specified.
  For a right drive wheel, add an R to the end of the part number, after the T or H.
 

W132 9 x 15 monocoque $735.00 W133 10 x 15 monocoque $760.00

PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Please View Our Warranty Information Here

Precision Metal Fab Racing