The 6 x 17” beadlock is used in the Street Bike Shootout so the wide tires
used will stay on the rim. It comes assembled complete with a rear hub of
7075 aluminum, bearings, bolts for both the brake and sprocket, and axle
spacers. The hub has a 1 1/8" offset. The brake side uses four 5/16" bolts
on a 3" bolt circle. The sprocket side uses eight 5/16" bolts on a 3" bolt
circle. The 10” thru 14” beadlock uses the same construction as our
Billet Dual Spoke only with thicker side plates to take the tremendous loads of Top Fuel, Pro Mod and Funny
Bike. Sprocket side has 4-1/4" bolt circle with 6 bolts 3/8" diameter with 3-1/4" center hole. W203 has 4-1/4"
bolt circle with 6-3/8" bolts and 6-3/8" doll-pins. That way all the sprocket shear load is on the pins,
not the bolts.
| W197T |
6 x 17 |
Teardrop |
$1665.00 |
| W197H |
6 x 17 |
Holes |
$1665.00 |
| W199T |
7 x 17 |
Teardrop |
$1665.00 |
| W199H |
7 x 17 |
Holes |
$1665.00 |
| W207T |
10 x 15 |
Teardrop |
$1925.00 |
| W209T |
11 x 15 |
Teardrop |
$1925.00 |
| W205T |
12 x 15 |
Teardrop |
$1925.00 |
| W206T |
13 x 15 |
Teardrop |
$1925.00 |
| W203T |
14 x 15 |
Teardrop |
$1925.00 |
Rear wheels available right or left drive. Optional ceramic bearings.
|
