| This setup is much stronger than the
conventional 1 3/4" x 1" swing arm .The rail is 4130 chrome moly ,
had three sets of holes for height adjustment purposes and is
available with centered or offset wheelie bar mounting The axle
holder is of 6061 - T651 aluminum and is available in standard
length or 2" extended in a variety of axle sizes . |
 |
 |
| C170 |
Axle Block Assembly |
Standard, 7/8" axle, offest rail |
$ 255.00 |
| C171 |
Axle Block Assembly |
Standard, 25mm axle, offset rail |
$ 255.00 |
| C172 |
Axle Block Assembly |
2" extended, 7/8" axle, offset rail |
$ 265.00 |
| C173 |
Axle Block Assembly |
2" entended, 25mm axle, offset rail |
$ 265.00 |
| C174 |
Axle Block Assembly |
Standard, 7/8" axle, centered rail |
$ 255.00 |
| C175 |
Axle Block Assembly |
Standard, 25mm axle, centered rail |
$ 255.00 |
| C176 |
Axle Block Assembly |
2" extended, 7/8" axle, centered rail |
$ 255.00 |
| C177 |
Axle Block Assembly |
2" extended, 25mm axle, centered rail |
$ 255.00 |
| C170SS |
Axle Block Assembly |
Standard,7/8" axle, offset rail, set screw
adjuster |
$ 255.00 |
| C170P |
Axle Block Assembly |
Standard, 7/8"axle, offset rail, Pro Stock
stylet |
$ 265.00 |
| C171SS |
Axle Block Assembly |
Standard, 25mm axle, offset rail, set screw
adjuster |
$ 255.00 |
| C174SS |
Axle Block Assembly |
Standard, 7/8" axle, centered rail, set screw
adjuster |
$ 255.00 |
| C175SS |
Axle Block Assembly |
Standard, 25mm axle, centered rail, set screw
adjuster |
$ 255.00 |
| C174SS |
Axle Block Assembly |
Standard, 7/8" axle, centered rail, set screw
adjuster |
$ 255.00 |
| rails, blocks, and adjusters are available
separately, click here for axles and nuts. |
| Upper and lower wheelie bar mounts -
weld-on |
| C186 ...$ 54.00 |
|
 |
Rear swing arm or frame extension made from 1
3/4" x 1" x .065 4130 chrome moly tube . Slotted to allow 2" axle
adjustment . Aluminum components are 6061 - T651 and adjustment rod
is 3/8"-16 grade 8 . Overall length is 8 1/2 " |
| C178 20mm axle |
C180 7/8"
axle |
|
| C179 3/4" axle |
C181 25mm
axle |
|
| Per set ................................ $
84.00 |
| Aluminum axle block, end cap, and
threaded adjuster. For use in 1 3/4" x 1" x .065 chrome
moly tubing . Same as above if you prefer to supply your
own tubing. |
| C182 20mm axle |
C184 7/8" axle |
| C183 3/4" axle |
C185 25mm axle |
| Per set
...............................$
54.00 |
|
 |
|
|
PRICES SUBJECT TO CHANGE WITHOUT NOTICE
Please View Our Warranty Information Here |
