The left side is available with your choice of an air or electric shift button along with another switch mounted below and forward used for launching.

Switches are ergonomically placed so there’s no uncomfortable wrist motion required to operate either switch, and yet they’re spaced far enough apart to prevent accidental pushes.

A fill valve and MRE air gauge are incorporated in either design for convenience. Barbed fittings are supplied as required.

Extra grippy knurled surface make gloves a mandatory item.

Electric - Only w/Air Fill

NEW!! Push/Pull

Our new push pull throttle for those classes that require the redundancy of a two cable system. It has all the features of our standard billet throttle and we’ve added another pulley and cable attachment.

The ultimate throttle grip achieves full throttle in one quarter turn or less with the average setup. Easily adjustable throttle stops for both open and closed make for easy setup, and the set screw for holding the cable housing means the cable will stay where you put it. The cable exits to the center for easy routing.

Built-ins include a tether switch so you don’t have to find room for something else on your handlebars, and an easily adjustable microswitch for nitrous or ?.

The throttle includes the same grippy surface as the left side (hey, you’d look funny with only one glove on anyway) and an idler wheel with smooth bearing action.

Throttle with Tether